Note:
After you finishing the Internet configuration, please click Save to make the settings take effect.
4.5.2 3G/4G Settings
If your modem router is in 3G/4G Router Mode, choose menu “Network
3G/4G Settings”, you
can configure parameters for 3G/4G function on the screen below. To use the 3G/4G function, you
should first insert your USB modem on the USB port of the modem router. There is already much
3G/4G USB modem information embedded in the modem router. If your USB modem is supported
by the modem router, then “Successfully Identified” will display in the USB 3G/4G Modem field.
Select the correct Location and Mobile ISP manually, the USB modem parameters will be set
automatically.
Some 3G/4G USB modem may not be supported by the modem router. For more information,
please refer to Compatibility List on our website: www.tp-link.com
. If your 3G/4G USB modem is
incompatible with our modem router, please contact our technical support by referring to the
Technical Support card found in your package.
34
To Next Page
Loading...
