TP-Link TD-W9970 - Page 35

TD-W9970
300Mbps Wireless N USB VDSL2 Modem Router User Guide
Figure 4-11
Click Advance, advanced selections of ATM Configuration can be shown.
 Encapsulation Mode: Select the encapsulation mode for the Static IP Address. Here you
can leave it default.
 ATM Qos Type: Select ATM Qos Type provided by ISP, and the type is UBR by default.
WAN Service Setup:
 Enable IPv4
：
Check the box to enable IPv4.
 IP Address: Enter the IP address in dotted-decimal notation provided by your ISP.
26