TP-Link TD-W9970 - Page 99

TD-W9970
300Mbps Wireless N USB VDSL2 Modem Router User Guide
Figure 4-87
 Enable IPv6 Firewall: Select the check box to enable the IPv6 Firewall function, so the
Default Filtering Rules can take effect.
 Description: Here displays the description of the IPv6 rule and this name is unique.
 IPv6 LAN Host: Here displays the LAN host selected in the corresponding rule.
 IPv6 WAN Host: Here displays the WAN host selected in the corresponding rule.
 Schedule: Here displays the schedule selected in the corresponding rule.
 Status: Here displays the status of the rule either enabled or disabled.
 Edit: Here you can edit or delete an existing rule.
To add a new IPv6 rule:
1. Click the Add New button, and you will see the screen as shown in Figure 4-88.
Figure 4-88
2. Give a name (e.g. Rule_1) for the rule in the Description field.
3. Select a host from the IPv6 LAN Host drop-down list or choose “Add IPv6 LAN Host”.
4. Select a target from the IPv6 WAN Host drop-sown list or choose “Add IPv6 WAN Host”.
5. Select a schedule from the IPv6 Schedule drop-down list or choose “Add IPv6 Schedule”.
90