Configuration Guide 160
System Tools Management
3
Management
In Management module, you can configure the following features:
Factory Default Restore
Backup & Restore
Reboot
Firmware Upgrade
3.1 Factory Default Restore
Choose the menu System Tools > Management > Factory Default Restore to load the
following page.
Figure 3-1 Reseting the Device
Click Factory Restore to reset the device.
3.2 Backup & Restore
Choose the menu System Tools > Management > Backup & Restore to load the following
page.
Figure 3-2 Backup & Restore Page
Choose the corresponding operation according to your need:
To Next Page
Loading...
