TP-Link TL-R470T Plus - Date Mode

System Tools Time Settings
Configuration Guide
169
DST Status Check the box to enable the DST function.
Mode Select Recurring Mode to specify a cycle time range for the daylight saving time. This
configuration will take effects every year.
Time Offset Specify the time added in minutes when Daylight Saving Time takes effect.
Starting Time Specify the starting time of Daylight Saving Time. The starting time is relative to
standard time.
Ending Time Specify the ending time of Daylight Saving Time. The ending time is relative to daylight
saving time.
6.2.3 Date Mode
Choose the menu System Tools > Time Settings > Time Settings to load the following
page.
Figure 6-5 Date Mode Page
In the Daylight Saving Time section, select one predefined DST schedule and click Save.
DST Status Check the box to enable the DST function.
Mode Select Date Mode to specify an absolute time range for the daylight saving time.
Time Offset Specify the time added in minutes when Daylight Saving Time takes effect.
Starting Time Specify the starting time of Daylight Saving Time. The starting time is relative to
standard time.
Ending Time Specify the ending time of Daylight Saving Time. The ending time is relative to daylight
saving time.