TP-Link TL-R470T Plus - NAT Configurations

Configuration Guide 58
Configuring Transmission NAT Configurations
2
NAT Configurations
With NAT configurations, you can:

Configure the Multi-Nets NAT.

Configure the One-to-One NAT.

Configure the Virtual Servers.

Configure the Port Triggering.

Configure the NAT-DMZ.

Configure the ALG.
2.1 Configuring the Multi-Nets NAT
Note:
TL-R470T+ does not support Multi-Nets NAT.
Choose the menu Transmission > NAT > Multi-Nets NAT and click Add to load the
following page.
Figure 2-1 Configuring the Multi-Nets NAT
Follow these steps to configure the Multi-Nets NAT:
1) Specify the name of the Multi-Nets NAT rule and configure other related parameters.