Configuration Guide 130
Configuring Authentication Local Authentication Configuration
Username /
Password
Specify the username and password of the user account. The username cannot be
the same as any existing one.
Authentication
Timeout
Specify the free duration of the account. The default value is 30 minutes.
Maximum Users Specify the maximum number of users that are allowed to use this username and
password to authenticate.
Upstream
Bandwidth /
Downstream
Bandwidth
Optional. Specify the upstream/downstream bandwidth for the user. 0 means no
limit.
Status Check the box to enable this account.
2.2.2 (Optional) Configuring the Backup of Local Users
Choose the menu Authentication > User Management > Configuration Backup to load
the following page.
Figure 2-4 Configuring the Formal User
To backup local users’ accounts
Click Backup button to backup all the local users accounts as a CSV file in ANSI coding
format.
To restore local users’ accounts
You can import the accounts to the router if you have backups. Click Browse to select the
file path (the backup must be a CSV file), then click Restore to restore the accounts.
You can also manually add multiple local user accounts at a time:
1) Create an Excel file and add the local user accounts to it, then save the Excel file as a
CSV file with ANSI coding format. You can click Backup to obtain a CSV file to view the
correct format.
2) Click Browse to select the file path, then click Restore to restore the file.
Note:
Using Excel to open the CSV file may cause some numerical format changes, and the number may be
displayed incorrectly. If you use Excel to edit the CSV file, please set the cell format as text.
To Next Page
Loading...
