Configuring Network IPv6 Configuration
Configuration Guide
41
Follow these steps to configure static IP connection:
1) In the General section, check the box to enable IPv6 function, then click Save.
IPv6 Check the box to enable IPv6 function.
2) In the Internet section, choose the Internet Connection type as Static IP, and configure
the corresponding parameters. Then click Save.
Internet
Connection Type
Choose Static IP as the connection type.
IPv6 Address Enter the IPv6 address provided by your ISP.
Default Gateway Enter the default gateway provided by your ISP.
Primary DNS/
Secondary DNS
Enter the DNS address provided by your ISP.
To Next Page
Loading...
