TP-Link TL-SG1016DE - Getting Started with Easy Smart Configuration Utility; Install the Configuration Utility; Switch Discovery Process; Switch Setting Configuration

Chapter Introduction
Chapter 3 System This module is used to configure system properties of the
switch. Here mainly introduces:

System Info: View device information and define the
device description.
 IP Setting: Get and modify the network parameters of the
switch.

User Account: Modify the username and password for
users to login the Web management page.
 Backup and Restore: Save the current configuration file
to your computer or download a backup configuration file
to your switch.
 System Reboot: Reboot your switch.
 System Reset: Reset the switch to the default.
 Firmware Upgrade: Update the firmware of the switch.
Chapter 4 Switching
This module is used to configure the basic functions of the
switch.
 Port Setting: Configure and view the basic parameters of
each port, including the port status, speed, duplex mode
and flow control.
 IGMP Snooping: Enable IGMP snooping feature and view
the current IGMP Group information.
 LAG: Configure and view the information of the LAG
group of the switch.
3