11
Chapter 2
Set Up Internet Connection Via Quick Setup Wizard
SSID 1 for VLAN 1
SSID 2 for VLAN 2
SSID 3 for VLAN 3
SSID 4 for VLAN 4
VLAN 1
VLAN 2
VLAN 3
VLAN 4
Existing Router
Internet
C
D A
B
1. Connect the access point according to Step A to D in the diagram.
2. Power on the access point, and wait until the Power ( ) and Wireless ( ) LEDs are
lit and stable.
3. Use the default SSID and Password printed on the label of the access point to join its
Wi-Fi network.
4. Launch a web browser, and visit http://tplinkap.net. Create a password to log in.
Note:
If the login window does not appear, please refer to the FAQ Section.
5. Go to Quick Setup and click Next to start.
6. Select Multi-SSID mode and click Next.
To Next Page
Loading...
