149
Chapter 17
Manage Your GPON Router
18. 2. Control the LED
The LED of the router indicates its activities and status. You can enable the Night Mode
feature to specify a time period during which the LED is off.
1. Visit http://tplinkmodem.net or http://192.168.1.1, and log in with the password you
set for the GPON router.
2. Go to Advanced > System > LED Control.
3. Enable Night Mode.
4. Specify the LED off time, and the LED will be off during this period every day.
5. Click SAVE .
18. 3. Test Internet Connectivity
Diagnostics function is used to test the connectivity between the router and the host
or other network devices.
1. Visit http://tplinkmodem.net or http://192.168.1.1, and log in with the password you
set for the GPON router.
2. Go to Advanced > System Tools > Diagnostics page.
¾ To test the internet connection of the router:
Locate the Diagnostic Tools section, and click the Start to test the internet connectivity
and you will find the test results in the gray box.
To Next Page
Loading...
Need help?
General
