159
Chapter 17
Manage Your GPON Router
18. 9. CWMP Settings
The router supports CWMP (CPE WAN Management Protocol), also called TR-069. This
collects information, performs diagnostics and configures the devices automatically
via ACS (Auto-Configuration Server).
1. Visit http://tplinkmodem.net or http://192.168.1.1, and log in with the password you
set for the GPON router.
2. Go to Advanced > System Tools > CWMP Settings page.
• CWMP: Enable or disable the CWMP (CPE WAN Management Protocol) function.
• Inform: Enable or disable the function of sending an inform message to the ACS (Auto
Configuration Server) periodically.
• Inform Interval: Set the time interval in seconds when the Inform message will be sent
to the ACS.
• ACS URL: Enter the web address of the ACS which is provided by your ISP.
To Next Page
Loading...
