66
Chapter 7
Customize Your Network Settings
1 ) Select DHCPv6 Server as the address type to make the router assign IPv6
addresses to hosts.
2 ) Specify the Starting/Ending IPv6 Address for the IPv6 suffixes. The router will
generate IPv6 addresses within the specified range.
3 ) Keep Address Lease Time as the default setting.
4 ) Keep Site Prefix Type as the default value Delegated. If your ISP has provided a
specific IPv6 site prefix, select Static and enter the prefix.
5 ) Keep WAN Connection as the default setting.
4. Click Save to make the settings effective.
7. 3. Configure GPON Settings
Follow the steps below to change your IP address.
1. Visit http://tplinkmodem.net or http://192.168.1.1, and log in with the password you
set for the GPON router.
2. Go to Advanced > Network > GPON Settings page.
3. Select a ASCII+HEX/HEX from the SN Type checkbox. Select a ASCII/HEX from the
Password Type checkbox. Do not change the default settings unless necessary.
To Next Page
Loading...
Need help?
General
