TP-Link XN021-G3 - Set up an Ipv6 Internet Connection; Set up Internet Connection in GPON Router Mode

19
Chapter 4
Set Up Internet Connection
3. Click Start to test the Internet connectivity and you will see the test result in the
gray box.
4. 5. Set Up an IPv6 Internet Connection
4. 5. 1. Set Up Internet Connection in GPON Router Mode
If your ISP has provided a fiber line that supports IPv6 connection as well as some
detailed IPv6 parameters, you can manually set up an IPv6 connection.
If your ISP provides an IPv4-only connection or IPv6 tunnel service, permit IPv6
connection by referring to IPv6 Tunnel.
Follow the steps below to set up an IPv6 connection:
1. Make sure you have set up an IPv4 connection before setting up an IPv6 connection.
2. Visit http://tplinkmodem.net or http://192.168.1.1, and log in with the password you
set for the GPON router.
3. Go to Advanced > Network > GPON WAN page.