4-1
f:tec\manuals\Service\SERVICEv5.indd - V6-0615
SERVICE MANUAL
TIREBOSS
TM
Tire Pressure Control
System Maintenance Overview
Attached is the information required to properly maintain your TIREBOSS™
Tire Pressure Control system for optimum performance.
DAILY - Drain wet tank
- Observe moisture content
- Walk around the truck , and visually inspect system and wheel ends
WEEKLY - Inspect Rotary Unions. See following Rotary Union Maintenance
Instructions for basic guidelines.
MONTHLY - Air Flow Check Procedures
- Complete and diarize the attached Monthly – Service Inspection sheet
6 MONTHS - Tire Pressure Loss Warning Check Procedures
- Complete and diarize the attached Six Month – Service Inspection sheet
- Check air supply system
ANNUALLY - Testing Overspeed Function
- Complete and diarize the attached Annual – Service Inspection sheet
- This needs to include the rebuilding of the valve pack(s) and fully
servicing your air drying system, as outlined on the Inspection Sheet.
Valve rebuild kits are available through our parts department.
- We recommend that this procedure is coordinated with your servicing in
the fall. This way your air drying system will be fully serviced before the
winter months providing optimal performance.
- Check Static Tank Orifi ce
Note: The above system maintenance schedules are based on typical commercial;
vehicle usage where an average of 100,000 km (60,000 miles) or higher are accumulated. Ve-
hicles that have lower mileage may adjust these schedules to suit the application. We do how-
ever, recommend that servicing is performed on a regular basis.
To Next Page
Loading...
