Assembly Instructions | ILM Servo Kits
13Edition 03/2021 EN
Safety
— The ILM servo kit reaches high temperatures during operation. If there is a thermal
bridge between the housing and the ILM servo kit installed in it, there is a risk of
burns on the housing surface.
— Body parts (fingers, arms, hair, etc.) may be injured or torn off due to the rotation
of exposed mechanical parts such as motor shafts. There is also the risk that items
of clothing (ties, scarves, chains, rings, etc.) or objects (cables, etc.) may be wound
onto the motor shaft and injure the wearer.
► Never touch rotating components (motor shafts, clutches, etc.).
► Do not wear belts, chains, ties or clothing with wide sleeves at the workplace.
► Wear a hairnet if you have long hair.
► Make sure that there are no exposed rotating parts.
— Rotating shafts can crack and parts (such as screws, etc.) can be flung about.
► Secure rotating shafts with a protective cover.
— Install the ILM servo kit only in a dry environment.
— Protect the ILM servo kit against moisture and wet conditions.
2.6 Warning labels
► Attach warning labels that indicate the relevant risks to the machines in which the
ILM servo kits are installed.
► Make sure that the warning labels are always clearly identifiable.
► Replace any damaged warning labels.
► Replace any warning labels that are missing.
To Next Page
Loading...
Need help?
General