TR-Electronic CDV582 - Page 19

Printed in the Federal Republic of Germany  TR-Electronic GmbH 2020, All Rights Reserved
10/07/2020 TR-ECE-BA-GB-0163 v03 Page 19 of 91
Upon completion of installation, a visual inspection with report should be carried out. Verify the
network quality with a suitable bus analysis tool whenever possible.
To ensure safe and fault-free operation, do observe
- the ODVA directive “Media Planning and Installation Manual” (Pub 148)
- the ODVA directive “EtherNet/IP™ Network Infrastructure Guide” (Pub 35)
- and the publications referenced therein!
In particular, do observe the EMC directive 2014/30/EU as amended!
For further technical ODVA guidelines see
https://www.odva.org/technology-standards/document-library/
Further information on EtherNet/IP™ and CIP Safety™ are available on request from the Open
DeviceNet Vendor Association (ODVA™) at the following address:
ODVA, Inc.
4220 Varsity Drive, Suite A
Ann Arbor, MI 48108-5006 USA
Phone +1 734.975.8840
Fax +1 734.922.0027
www.odva.org
e-mail: mailto:odva@odva.org
More literature download options:
http://literature.rockwellautomation.com/
www.rockwellautomation.com/knowledgebase/