TR-Electronic CDV582 - Page 86

Error causes and remedies
 TR-Electronic GmbH 2020, All Rights Reserved Printed in the Federal Republic of Germany
Page 86 of 91 TR-ECE-BA-GB-0163 v03 10/07/2020
. . .
General Status Code Name Description
0x13 Not enough data
The service does not support enough data to
perform the requested operation.
0x14 Attribute not supported
The attribute specified in the request is not
supported.
0x15
Too much data
The service provides more data than expected.
0x16 Object does not exist
The specified object is not implemented in the
device.
0x17
Service fragmentation
sequence not in
progress
The fragmentation sequence for this service is
currently not active for this data.
0x18 No stored attribute data
The attribute data for this object was previously
not saved for the requested service.
0x19 Store operation failure
An error caused the attribute data for this object
not to be saved.
0x1A
Routing failure, request
packet too large
The service request packet in the path to the
target was too large for transmission on the
network.
0x1B
Routing failure,
response packet too
large
The service response packet in the path from the
target was too large for transmission on the
network.
0x1C
Missing attribute list
entry data
An attribute in the attribute list is not supported by
the service but is required by the service to
perform the requested behavior.
0x1D
Invalid attribute value
list
The service returns an attribute list with invalid
status information for this data.
0x1E
Embedded service error
An error has occurred in an embedded service.
0x1F
Vendor specific error
–
0x20 Invalid parameter
A parameter associated with the request was
invalid. This code is used when a parameter does
not meet the ODVA™ or Application Object
Specifications.
0x21
Write-once value or
medium already written
An attempt was made to write to a medium that
can only be written once, e.g. WORM Drive,
PROM. Or an attempt was made to change a
value that can only be set once.
0x22 Invalid Reply Received
An invalid response was received, e.g. the
Response Service Code does not match the
Requested Service Code, or the returned
message is smaller than the expected size.
0x23 Buffer Overflow
The received message is larger than the receive
buffer can process. The entire message was
discarded.
. . .