Trane CVHG Information Manual

Machine Configuration
Information Manual 47
Auxiliary Condenser Option
Possible values for status are: Installed and Not
Installed (Factory Default).
Heat Recovery Option
Possible values for status are: Installed and Not
Installed (Factory Default).
Hot Gas Bypass Option
Possible values for status are: Installed and Not
Installed (Factory Default).
Free Cooling Option
Possible values for status are: Installed and Not
Installed (Factory Default).
Condenser Pressure Sensor Option
Possible values for status are: Installed and Not
Installed (Factory Default).
Bearing Temperature Sensors Option
Possible values for status are: Installed and Not
Installed (Factory Default).
Discharge Temperature Sensor Option
Possible values for status are: Installed and Not
Installed (Factory Default).
Ice Building Option
Possible values for status are: Installed and Not
Installed (Factory Default).
Differential Water Press Sensing Option
Possible values for status are: Installed, <= 150 psig
(1035 kPa), Installed, > 150 psig (1035 kPa), and Not
Installed (Factory Default).
Auxiliary Condenser Option: [status]
Press (+)(-) to Change Setting
Heat Recovery Option: [status]
Press (+)(-) to Change Setting
Hot Gas Bypass Option : [status]
Press (+)(-) to Change Setting
Inlet Guide Vane Output
Has been Set to Stepper Motor
Free Cooling Option: [status]
Press (+)(-) to Change Setting
Condenser Press Sensor Option:[status]
Press (+)(-) to Change Setting
Bearing Temp Sensors Option: [status]
Press (+)(-) to Change Setting
Discharge Temp Sensor Option: [status]
Press (+)(-) to Change Setting
Ice Building Option: [status]
Press (+)(-) to Change Setting
Diff Wtr Press Sensor Opt: [status]
Press (+)(-) to Change Setting

Trane CVHG Specifications

General

Brand	Trane
Model	CVHG
Category	Chiller
Language	English