Operation
39BAS-SVX08D-E4
Data
Type
Offset Point DescriptionFunction
Modbus
Index
10036 35 external auto/stop bit
10037 36 emergency stop bit
10038 37 CTV: external free cooling bit
10039 38 CTV/RTH: external ice making bit
10040 39 CTV: external heat pump bit
10041 40 Manual Chilled Water Pump (1= ON; 0 = AUTO) bit
10042 41 External Input Type (0 = 4-20mA; 1 = 2 - 10V) bit
10043 42 CTV: Manual Oil Pump (1= ON, 0 = AUTO) bit
30001 0 Leaving Chilled Water Temperature Temperature
30002 1 Entering Chilled Water Temperature Temperature
30003 2 Condenser Leaving Water Temperature Temperature
30004 3 Condenser Entering Water Temperature Temperature
30005 4 Average % Current Draw Percentage
30006 5 Operating Code None
30007 6 Last Active Diagnostic Code None
30008 7 Active Chilled Water Setpoint Temperature
30009 8 copy of function 2 binary points 10001 to 10011 bitfield
30010 9 Last Operating Mode at Time of Last Diag None
Bit 0 UNUSED
Bit 1 UNUSED
Bit 2 UNUSED
30011 10 Bit 3 Limit Warning (1=Warning)
Bit 4 Chilled Water Pump (1 = On, 0 = Off)
Bit 5 Condenser Water Pump (1 = On, 0 = Off)
Bit 6 Compr/Unit Running (1 = Yes, 0 = No)
Bit 7 Alarm (1 = On, 0 = Off) bitfield
Bit 0 UNUSED
Bit 1 UNUSED
Bit 2 UNUSED
30012 11 Bit 3 UNUSED
Bit 4 UNUSED
Bit 5 CTV/RTH: Actively Ice Making (1 = Yes, 0 = No)
Bit 6 Reset Relay (1 = On, 0 = Off)
Bit 7 CTV/ABS: Max Capacity (1 = Yes, 0 = No)" bitfield
Bit 0 Chilled Water Flow (1 = On, 0 = Off)
Bit 1 Condenser Water Flow (1 = On, 0 = Off)
Bit 2 MMR exits
30013 12 Bit 3 MAR exits
Bit 4 IFW exists
Bit 5 RESERVED
Bit 6 RESERVED
Bit 7 RESERVED bitfield
30014 13 Active Outdoor Air Temperature Temperature
Bit 0 RESERVED
Bit 1 RESERVED
Bit 2 Tracer
Bit 3 External Direct Capacity Control
Bit 4 future 2
Bit 5 future 1
Bit 6 External Input
Bit 7 Front Panel" bitfield
30016 15 CTV/RTH: Active Ice Termination Setpoint Temperature
Analog
Inputs
4
Binary
Inputs
2
Table 15 - Continued
Unit