Trane Tracer UC400 Uc

VAV-SVX07B-EN 79
Additional Resources
For more detailed information, refer to the following documentation:
• BACnet MS-TP Wiring and Link Performance Best Practices and Troubleshooting Guide

(BAS-SVX51)
• Engineered Smoke Control System for Tracer™ SC System Controller Application Guide (BAS-
APG019)
• Tracer™ UC400 Controller BACnet Protocol Implementation Conformance Statement (PICS)
[BAS-PRG007]
• Tracer™ UC400 Programmable Controller Installation, Operation, and Maintenance Manual
(BAS-SVX20)
• Tracer™ SC System Controller Installation and Setup (BAS-SVX31)
• Air Systems for Tracer SC Application Guide (BAS-APG007)
• Tracer™ SC Unit Controller Wiring Guide (BAS-SVN03)
• Tracer Graphical Programming 2 (TGP2) Editor Online Help
• Tracer Graphical Programming (TGP2) Application Guide (BAS-APG008)
• Tracer TU Online Help
• Tracer TU Service Tool Getting Started Guide (TTU-SVN01)
• Wireless Zone Sensors for Models WTS, WZS, and WDS Installation, Operation and
Maintenance Manual (BAS-SVX04)
Note: Wireless zone sensors are compatible with the Tracer Programmable BACnet Controller
and can be ordered as factory installed.

Trane Tracer UC400 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°F to 158°F (-40°C to 70°C)
Enclosure Rating	IP20
Controller Type	Programmable
Communication Protocol	BACnet MS/TP
Power Supply	24 VAC
Power Consumption	10 VA
Humidity Range	5% to 90% RH non-condensing
Supply Voltage	24 VAC/VDC