Trane Tracer ZN517 - Page 95

Input/output terminal wiring
CNT-SVX12C-EN 83
Figure 28. Location of J1 on Tracer ZN517 circuit board
Figure 29. Coupling and uncoupling terminals Rc and Rh for 24 Vac
wiring of the HVAC unit
J1 (location of
jumper for Rc,
Rh terminals)
J1 J1
Place the jumper on
both pins at J1.
For packaged units
Remove the jumper from
one of the pins at J1.
(Leave it on one of the pins
for possible future use.)
For split systems