24 RT-SVX34C-EN
Unit Dimensions and Weights
Figure 13. Center of Gravity
Table 3. Center of Gravity
1
Center-of-Gravity (inches)
Unit Model
YC Low Heat
Dimension
YC High Heat
Dimension TC/TE Dimension
X Y Z X Y Z X Y Z
***330/275* 41 76 33 41 84 33 42 76 33
***360/305* 43 77 33 43 85 33 44 77 33
***420/350* 42 78 33 42 86 33 43 78 33
***480/400* 42 111 35 42 111 35 42 111 35
***600/500* 43 108 35 43 108 35 43 108 35
Note: Center-of-gravity dimensions are approximate, and are based on the unit equipped with: standard
efficiency coils, standard efficiency motors, economizer, inlet guide vanes, and throwaway filters
Note: Z dimension is upward from the base of the unit.
Example:
Locating the center-of-gravity for a YC-360 MBH High Heat unit with 100% exhaust.
X = 43 inches inward from the control panel side
Y = 85 inches inward from the compressor end
Z = 33 inches upward from the base
Table 4. Approximate Units Operating Weights — lbs./kg1
Unit
Model
Basic Unit Weights1
YC
Low Heat
YC
High Heat TC TE
**D330/275 3750 1701 4130 1873 3620 1642 3640 1651
**H330/275 3790 1719 4220 1914 3660 1660 3680 1669
**D360/305 3845 1744 4225 1916 3715 1685 3735 1694
**H360/305 3885 1762 4315 1957 3755 1703 3775 1712
**D420/350 3970 1801 4350 1973 3840 1742 3860 1751
**H420/350 4010 1819 4440 2014 3880 1760 3900 1769
**D480/400 4764 2161 4884 2215 4539 2059 4564 2070
**H480/400 4859 2204 4984 2261 4599 2091 4634 2102
**D600/500 5174 2347 5294 2401 4949 2245 4974 2256
**D600/500 5269 2390 5394 2447 5019 2277 5044 2288
Notes:
1. Basic unit weight includes minimum horsepower supply fan motor.
To Next Page
Loading...
