Traceroute Diagnostic
Maintenance > Diagnostics > Traceroute
Traceroute shows the pathway to a connected device on the network.
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Maintenance, click on Diagnostics, and click on Traceroute
3. Review the settings and click traceroute to start the trace.
Check ADSL Connection using the router management page
Maintenance > Diagnostics > ADSL
Traceroute shows the pathway to a connected device on the network.
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Maintenance, click on Diagnostics, and click on ADSL.
3. Click the Start button to start running the ADSL Diagnostic Test. This test will take
about 3 minutes to complete.
Check Internet connectivity using the router management
page
Maintenance > Diagnostics > Diag Test
This page allows you to test the connectivity of the physical and protocol layers on the
WAN side.
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Maintenance, click on Diagnostics, and click on Diag Test.
3. Select your DSL interface and click Run Diagnostic Test.
Check the router system information
Status > Device Info
You may want to check the system information of your router such as WAN (Internet)
connectivity, wireless and wired network settings, and router MAC address information.
To Next Page
Loading...
Need help?
General
