6. Click Apply to save settings.
Setup IPv6 on your router
Setup > Internet Setup > Channel Config
IPv6 (Internet Protocol Version 6) was developed to be the successor protocol to well-
known and widely used protocol IPv4 (Internet Protocol Version 4) for network
addressing. The new addressing protocol is designed to minimize processing overhead
by routers, significantly increase the available IP address space, provide integrated
security, and open the possibility of more extensions and options. ISP have already
transition their networks to accommodate IPv6 and are starting to offer IPv6 services.
Note: The router offers native IPv6 as well as IPv4 to IPv6 transitional connection
types.
IPv6 WAN
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Setup, then select Internet Setup, and click on Channel Config.
4. Select your IPv6 WAN type and complete the fields required by your ISP. Click Apply
to save settings.
Configure ADSL settings
Setup > Internet Setup > ADSL Settings
This page allows you to select ADSL modulations, capabilities, and other options.
Consult your ISP to determine the appropriate settings.
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Setup, click on Internet Setup and click on ADSL Settings.
4. Select the fields required by your ISP. Click Apply to save settings.
To Next Page
Loading...
Need help?
General
