TRENDnet TEW-820AP - Page 7

TRENDnet User’s Guide
TEW-820AP
8. Select the mode you would like to configure the TEW-820AP. For this example we
will configure the TEW-820AP in Access Point mode. Select Access Point and click
Configure.
9. Select how to configure the LAN settings of the TEW-820AP. For installation it is
recommended to select Dynamic IP Address Configuration and click Next to continue.
10. Select Manual Setup to manually configure the TEW-820AP wireless settings.
11. Enter the SSID or wireless network name you would like to assign your TEW-820AP
and click Next.
© Copyright 2014 TRENDnet. All Rights Reserved.
6