TRENDnet User’s Guide TEW-822DRE
© Copyright 2015 TRENDnet. All Rights Reserved. 24
Wireless (Range Extender Mode)
Site Survey
When TEW-822DRE is operating in Range Extender mode, you can
refresh the wireless router link by searching for new wireless network.
Navigate to Wireless and Site Survey to start wireless site survey.
TEW-822DRE will start searching again.
Select the wireless router or access point you want to connect with
and then click Next. (If you don’t find the wireless network you
want, click Last to start over the site survey again.)
Enter the WiFi password and then click Next. (When necessary, check on
Show Password to make sure the WiFi password you entered is correct.)
Choose the extended wireless network name. By default, the TEW-
822DRE will have the same wireless name (SSID) to your wireless router.
All your devices can seamlessly roaming in between TEW-822DRE and
your wireless router.
In case that you want to specifically connect to TEW-822DRE or your
wireless router, you can setup the extended network to a different name.
Click Next after you choose your extended wireless network name.
To Next Page
Loading...
Need help?
General
