TRENDnet User’s Guide TEW-822DRE
© Copyright 2015 TRENDnet. All Rights Reserved. 42
Tools - Remote Logging
To save the system log to remote Syslog Server to real time monitor your
TEW-822DRE, you can setup the Syslog Service Settings to send the
system log over the network.
Enable Logging
to Syslog
Server :
Check this box to start sending logs remotely to
Syslog server.
Syslog Server
IP Address:
Enter the Syslog Server IP address.
Click Save Settings to save the changes
Tools - LED Control
All LED indicators are turned on by default. You can turn them off so they
are not create weird lighting at night. Check on the LED Disable and then
Save Settings to disable all LEDs.
To Next Page
Loading...
Need help?
General
