TRENDnet User’s Guide TEW-822DRE
© Copyright 2015 TRENDnet. All Rights Reserved. 39
Tools - Backup Settings
Click Save to export settings to your
computer.
To restore settings previously saved on
your computer, click Choose File to select
a configuration file and then click Load to
import the previous settings.
Restore Factory
Default Settings
Click Factory Default to restore settings
to factory defaults.
Click Reboot to reboot your TEW-
822DRE.
Tools - Ping Test
To check your network connection, you can use the PING Test tool from
yourTEW-822DRE. Enter the IPv4 address you want to ping and click
Ping. The result will be showed in the terminal down below.
If you are in Access Point operation mode, you can ping the IPv6
address as well. Enter the IPv6 address you want to ping and click Ping.
To Next Page
Loading...
Need help?
General
