TRENDnet User’s Guide TEW-822DRE
© Copyright 2015 TRENDnet. All Rights Reserved. 9
Range Extender Set Ups
There are two ways to setup your Range Extender: by pushing Wi-Fi
Protected Setup (WPS) button or web browser configuration.
WPS Connection
1. Plug in the TEW-822DRE to a power outlet nearby your wireless
router and position the operation switch to Extender.
2. Press and release the WPS button for 5 seconds until the WPS LED
lights. The LED will blink, which means the TEW-822DRE is starting
WPS pairing.
3. Press and hold the WPS button on the router for 5 seconds to start
WPS pairing.
4. The WPS will stop blinking and the Wireless LED will lit when the
connection is established.
To Next Page
Loading...
Need help?
General
