4. Plug in USB storage device into the USB port.
5. Under Windows®, you can access the USB storage device on your computer under
Computer > Network > TRENDNETXXXXXX > sda1.
Note: Each TEW-830MDR unit will be listed under Computer > Network section with the
format TRENDNETXXXXXX (ex: TRENDNET459681, TRENDNET459682, etc.).
If your Windows® computer is not able to discover any network devices, you may not
have network discovery and file sharing enabled, therefore, you may need to set the
network to a private network and turn the feature on in Windows®
6. When prompted for a user name and password, enter the same user name and
password you created during the initial app setup which is the same user name and
password used to log into your router.
To Next Page
Loading...
Need help?
General
