• Settings – This page will display the current status of service account
and router as well as allow you to set the time zone settings.
• Support – This page will display provide support on information on the
Router Limits web management system and allow you to submit support
tickets if needed.
You can access and manage your Router Limits account configuration settings through
https://routerlimits.com and logging in.
If behind your router, you can also access your account by going to Services > Router
Limits™ in your router management page and clicking Manage Account.
Enable/disable UPnP on your router
Tools > UPnP
UPnP (Universal Plug and Play) allows devices connected to a network to discover each
other and automatically open the connections or services for specific applications (e.g.
instant messenger, online gaming applications, etc.) UPnP is enabled on your router by
default to allow specific applications required by your computers or devices to allow
connections through your router as they are needed.
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Tools and click on UPnP
3. Under the UPnP section, check the option to enable UPnP or uncheck to disable
UPnP.
Note: It is recommended to leave this setting enabled, otherwise, you may encounter
issues with applications that utilize UPnP in order allow the required communication
between your computers or devices and the Internet.
4. To save changes to this section, click Apply at the bottom of the page when finished.
To Next Page
Loading...
Need help?
General
