Note: You can delete static route entry by clicking icon next to the entry.
4. To save changes to this section, click Apply at the bottom of the page when finished.
File Sharing
Storage > File Sharing
Samba is a network protocol that allows you to access shared files through your
network. In order to share files, you will need to plug in a USB storage device on the USB
port of the TEW-830MDR.
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Storage and click on File Sharing. To save changes to this section, click Apply
at the bottom of the page when finished.
• Workgroup: By default, the workgroup name is set to WORKGROUP which is the
default name set in Windows®. You can manually change the workgroup name to
a different name but make sure to set all computers and devices that will be
accessing the USB file storage device on the network.
• Description: Enter a name description file sharing device. This parameter is
optional.
Under the Mesh List, the all of the mesh nodes will be listed. File sharing/Samba can be
enabled or disabled for each node.
To Next Page
Loading...
Need help?
General
