Backup and restore your configuration settings
Tools > Backup / Restore
You may have added many customized settings to your router/mesh network and in the
case that you need to reset your router/mesh network to default, all your customized
settings would be lost and would require you to manually reconfigure all of your router
settings instead of simply restoring from a backed up router configuration file.
To backup your router configuration:
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Tools and click on Backup / Restore.
3. Next to Download Backup, click Generate Archive.
4. Depending on your web browser settings, you may be prompted to save a file (specify
the location) or the file may be downloaded automatically to the web browser
settings default downloads folder. (Default Filename: backup-TEW-830MDR-YYYY-
MM-DD.tar.gz)
To restore your router configuration:
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Tools and click on Backup / Restore.
3. Next to Restore Backup, click Browse or Choose File (depending on your web
browser).
4. A separate file navigation window should open.
5. Select the configuration file to restore and click Upload Archive. (Default Filename:
backup-TEW-830MDR-YYYY-MM-DD.tar.gz). If prompted, click Yes or OK.
6. Wait for the router to restore settings.
Reboot your router / mesh network
Advanced > Administrator > Settings Management
You may want to restart your router/mesh network nodes if you are encountering
difficulties and have attempted all other troubleshooting.
There are two methods that can be used to restart your router.
• Turn the router off for 10 seconds by disconnecting the power adapter connector
located on the rear panel power port from the power port of your
router/network node, see “Product Hardware Features” on page 2.
Use this method if you are encountering difficulties with accessing your router
management page. This is also known as a hard reboot or power cycle.
OR
• Router Management Page / TRENDnet Mesh App – This is also known as a soft
reboot or restart.
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Tools and click on Reboot.
3. To restart all mesh devices in the list, click Restart All.
To restart individual mesh devices in the list, next to the mesh node you would like to
restart, click Restart
To Next Page
Loading...
Need help?
General
