Trianco GREENFLAME 55 - Unpacking

4.2 Unpacking
The TR Engineering Ltd Greenflame Pellet Boiler System is delivered in a single crate.
Remove the wooden crate, cardboard packaging, polystyrene packing, and bubble wrap
packaging and recycle in the appropriate manner.
The following items should accompany you Greenflame pellet boiler system :
Fillomatic Pellet Transport System
 Pellet cyclone c/w door flap sensor.
 40-65mm hose clamps to connect flow and return vacuum feed pipes.
 Auger system – either the Fillomatic standard auger or the Fillomatic floor track
system.
De-Ash Box
 Boiler scraper tool
 Burner scraper tool
 A4 Manual pack
 Installation and User Manual
 Product Registration Card
 Foil tape to blank de-ash outlet
 Chimney pipe gasket
 Hopper/Boiler fixing bolts x 2
 Cable ties to tidy cable runs after installation.
15
In the unlikely event that an item is missing then your Agent should be notified within 5
working days in order to issue replacement parts. Missing or mislaid parts notified after
5 working days will incur a charge plus postal costs.
The following guidelines should be followed to ensure that the installation of the boiler
is carried out in a trouble free manner.
Be careful when moving or lifting the boiler as it is heavy
and could cause an injury. Use appropriate lifting
techniques and equipment for the individual weights of
these sections. Take all necessary precautions to prevent
damage to external casing.