TRIMOS V6 User Manual

V3 / V4 / V5 / V6 / V8
750 50 0045 03 33
8.2 List of commands
Attribute Command Description
1, 2 PRI Prints the currently displayed value.
1, 2 ? Prints the currently displayed value.
1, 2 CLE Resets the min and max values.
ID? Prints a short description (TRIMOS_V{num}_{height}_{serial}).
1 IN Sets the current unit to inch.
1 MM Sets the current unit to millimetre.
KEY0 Locks all the keys of the keypad (alias of: LCK0123456789.E).
KEY1 Unlocks all the keys of the keypad (alias of: ULK0123456789.E).
1 AXI Sets the current mode to "Axis".
1 DIA Sets the current mode to "Diameter".
1 DEL Sets the current mode to "Delta".
1 NOR Sets the current mode to "Normal" (height).
1 MAX Sets the current mode to "Maximum".
1 MIN Sets the current mode to "Minimum".
MOD? Prints the current mode ("NOR", "DIA", "AXI", "MIN", "MAX" or "DEL").
1, 3 POS+{num} Moves the probe to the selected relative position.
1, 3 POSA+{num} Moves the probe to the selected absolute position.
1, 2, 3 PROD Performs a downwards measurement (in probing speed)
1, 2, 3 PROU Performs an upwards measurement (in probing speed)
POSE Enables the automatic of the position after a move.
POSD Disables the automatic of the position after a move.
1 ZERO Initializes the display to zero
1, 2 PRE Displays the preset value.
1, 2 PRE+{num} Sets the preset value.
PRE? Prints the preset value.

TRIMOS V6 Specifications

General

Brand	TRIMOS
Model	V6
Category	Measuring Instruments
Language	English