V3 / V4 / V5 / V6 / V8
750 50 0045 03 41
10.3 Adjustment of Floating Probe Suspension Balancing
In order to guarantee a constant measuring force in both
directions (upwards and downwards), it is necessary to
adjust the balancing of the floating probe suspension
according to the probe in use.
The adjustment button of the floating suspension (1)
allows compensating the weight of the probe in use.
A function facilitating the balancing can be found in the
set-up menu (§ 9).
10.4 Other motorised movement methods (V5 & V6)
10.4.1 With keyboard keys
The carriage displacement in probing speed, as well as
the release of the probe and stop of movement are
possible with both keys opposite.
The use principle is similar to that for the use of motorized
displacement keys.
10.4.2 With programmable functions buttons
The motorized movement of the carriage is also possible
thanks to the programmable function buttons.
When activated, they are used exactly like the motor
buttons behind the handle.
To activate this mode: see § 9.
To Next Page
Loading...
Need help?
General
