98
Maintenance and Adjustment
Spring Pre-Load Adjustment -
Sprint ST
1. Spring pre-load adjuster
The spring pre-load adjuster is situated on
the left hand side of the motorcycle, at the
top of the rear suspension unit.
To adjust the spring pre-load setting rotate
the slotted adjuster clockwise to increase, or
counter-clockwise to decrease.
Note:
• The setting is measured as the
number of adjuster 'clicks' out
from the fully screwed in position.
• The motorcycle is delivered from
the factory with the spring
pre-load set to 20 'clicks' out from
the fully screwed in position.
Spring Pre-Load Adjustment -
Sprint GT
1. Spring pre-load adjuster
The spring pre-load adjuster is situated on
the right hand side of the motorcycle, above
the swinging arm.
To adjust the spring pre-load setting rotate
the slotted adjuster clockwise to increase, or
counter-clockwise to decrease.
Note:
• The setting is measured as the
number of adjuster turns out from
the fully screwed in position.
• The motorcycle is delivered from
the factory with the spring
pre-load set to 30 'clicks' out from
the fully screwed in position.
ccnt
To Next Page
Loading...
