93
Maintenance and Adjustment
Rear Brake - Sprint GT
1. Rear brake fluid reservoir
2. Upper level line
3. Lower level line
Level Inspection and Adjustment
Remove the seat.
Remove the reservoir cap. Fill the reservoir to
the upper level line using new DOT 4 fluid
from a sealed container.
Re-install the reservoir cap ensuring that the
diaphragm seal is correctly installed.
Re-install the seat.
Brake Light Switches
The brake light is activated independently by
either the front or rear brake. If, with the
ignition in the ON position, the brake light
does not work when the front brake lever is
pulled or the rear brake pedal is pressed,
have your authorized Triumph dealer
investigate and rectify the fault.
cgbx
1
2
3
Riding the motorcycle with defective brake
lights is illegal and dangerous.
An accident causing injury to the rider and
other road users may result from use of a
motorcycle with defective brake lights.
To Next Page
Loading...
