Safety
1 4 7 10
2 5 8 11
3 6 9
2.6 Safety devices
2.7 Technical protective measures
2.7.1 Main switch
Pressing the main switch on the backside of the machine to disconnect the machine from the mains power supply.
2.7.2 Key switch
Turning the key switch to the "0" position powers off the motor, laser source and electric system. Operation of the
machine by unauthorized persons can be prevented by removing the key switch.
2.7.3 Emergency stop button
Pressing the emergency stop button immediately switches off the circuit.
The laser beam is interrupted and all movements are stopped.
The task of the emergency stop switch is:
First priority: Prevention of danger to the operating personnel.
Second priority: Prevention of damage or destruction of the machine and/or material.
20