Operation
3. Level the x-axis using a spirit level. Set the machine to
the correct height using the height-adjustable feet on
the machine.
7.1.1 Installation and replacement of the laser source
Caution
The laser source must be installed and replaced by a technician.
Warning Dangerous electrical voltage
High voltage can cause serious injury or even death.
The laser source may only be replaced and installed by trained, qualified and authorized personnel.
Observe general electrotechnical safety regulations.
Disconnect the power supply before opening. Wait at least 30 minutes before starting work on the laser
source.
7.2 Soware
For information on how to use the soware, please read the accompanying soware manual, which you will find on the
storage medium provided.
7.3 Power On/Off
Notice
In order not to restrict or obstruct the freedom of movement of the mechanics, no objects of any kind may
be located in the machining area.
All safety protection covers have to be fully functional and closed.
SWITCH ON MACHINE:
1. For water-cooled systems, first switch on the water cooling.
48
To Next Page
Loading...
Need help?
General
