Trotec Q500 - Page 80

Technical Datasheet
2/
3
Options and optional accessories
Working table Aluminium slat cutting table
Lenses
4.0” lens
Exhaust / Vent-Set
2x external ventilators incl. accessories (hoses, hose clamps)
JobControl® Vision Registration mark recognition and compensation system
External variable power meter
Adjust the laser power in a range of ± 20% on the fly
Control system
Laser power Adjustable from 0-100%
Hardware-interface
Connection to the PC via USB 2.0-Interface
Laser equipment and power
Laser source
Sealed CO2 DC laser source water-cooled
Laser power: 100 W / 120 W
AND OR
Sealed-off CO2 RF CeramiCore® laser source water-cooled
Laser power: 60 W
Water-cooling
16 l/min or 70 l/min for DU-version
„Ready-for-RF“-upgrade kit
Set to upgrade to a sealed-off CO2 RF CeramiCore® laser source water-cooled
Laser power: 60 W
Dimensions and weight
Width x Depth x Height
1870 mm x 1700 mm x 1110 mm (73.62 x 66.93 x 43.7 inches)
Weight
Approx. 570 kg
Ambient conditions
Mandatory ambient temperature 59° to 77° F or +15° to +25° C
Humidity 40% to max. 70%, not condensing
Dust free environment (2nd degree according to IEC 60947-1)