True CS900 User Manual

CHAPTER 4D: EMERGE OPERATION
ADVANCED CONSOLE FUNCTIONS (continued):
Maintenance Mode Navigation (continued):
Within a category users can scroll through available options using the + and - Workload Keys (A). Once the desired
setting is shown in the Upper LED Display (B), press the Enter Button (C) to confirm the selection. After confirming the
selection, the + and – Workload Keys (A) are used to change the options within the setting. After changing any setting the
Start Button (D) MUST be pressed to save the changes (if the start button is not pressed to save the changes, the setting
will revert to the default value). The Stop Button (E) is used as a back button in Maintenance Mode and will take the user
back one screen each time it is pressed. To exit the maintenance mode press the Stop Button (E) repeatedly until
“Maintenance Mode” is displayed on the Upper LED Display (B) and then press and hold the Stop Button to reset the
console or simply stop pedaling and allow the unit to completely power down.
A
B
C
D
E
Truefitness.com / 800.426.6570 / 636.272.7100 115

True CS900 Specifications

General

Brand	True
Model	CS900
Category	Elliptical Trainer
Language	English