CHAPTER 4A: TRANSCEND OPERATION
ADVANCED CONSOLE FUNCTIONS (continued):
Setup Menu - Network Setup:
The Network Setup screen displays the current network information for the console. This screen also allows users to setup
wired or wireless internet connection, enable web browsing, and allows for Netpulse® configuration (in a Netpulse®
enabled environment). To connect to a network, simply touch the Setup Connection button (A) and select the desired
network from the list (and enter the password if necessary) and then press connect.
Configuring Netpulse®:
• Touch the Netpulse Enabled Slider button (C) to enable it.
• Touch the Configure Netpulse Button (D)
• On the screen that follows, touch the Test Network button.
• Once the screen displays the message “All network tests passed”, touch the Install button.
• The screen will then display the message “Installation was successful”.
• Touch the Back button to return to the Network Setup screen.
Enabling the Web Browser:
• Touch the Web browser Enabled Slider (E) to enable it.
• Accept the Internet Service Agreement.
• Select a homepage by touching the Homepage Address Bar (F) and typing the web address of the desired page and
pressing Enter to confirm the page.
• Ensure that the correct Region (G) is displayed.
Truefitness.com / 800.426.6570 / 636.272.7100 60
To Next Page
Loading...
Need help?
General
