CHAPTER 4A: TRANSCEND OPERATION
ADVANCED CONSOLE FUNCTIONS (continued):
Diagnostics Menu - Software Update (continued):
• Insert the USB drive containing the software update into the console’s USB port.
• From the Main Menu, press the Diagnostics button. Then press Software update button (A).
• When the console locates the software update, press the Update Software button (B)
• After the installation of the software update, press the Load Firmware button (C).
Diagnostics Menu - Touch Screen:
Touching the Touchscreen key (A) will open the touchscreen calibration tool. On the first screen displayed, users can
touch anywhere in the white area (B) and a small red box (C) will appear to verify screen function. Touching the Calibrate
button (D) will begin a touchscreen calibration. During this process, targets will appear on the screen and the user must
press and hold each target until it turns red to complete the calibration.
Diagnostics Menu - Advanced:
The advanced screen contains multiple tools that are used in the production of the console and for demonstration
purposes. It is recommended to leave these settings in their default positions.
the unit between the software
Truefitness.com / 800.426.6570 / 636.272.7100 66
To Next Page
Loading...
Need help?
General
