CHAPTER 2: ASSEMBLY INSTRUCTIONS
Truefitness.com / 800.426.6570 / 636.272.7100 11
ELLIPTICAL ASSEMBLY STEPS (continued):
STEP 1: Attach Push Rods (continued):
d) Place Rubber Cap from Bag 1 in
hole after assembly.
Hardware Required (Bag1):
STEP 2: Assemble Pedestal to Base:
a) Remove front handles before
assembling pedestal.
b) Use 2 people to slide the
Pedestal straight down onto the
Base and be careful to not pinch
the wires on the right side of the
base.
To Next Page
Loading...
