True TC900 - Page 20

CHAPTER 2: ASSEMBLY GUIDE
Truetness.com / 800.426.6570 / 636.272.7100
20 of 171
TREADMILL ASSEMBLY STEPS:
Step 8 Lower Console Rack Cover:
Step 9 Shoulder Trim Assembly:
a) Position the rear edge with the
long screw bosses slightly up inside
the console rack rst. Next, carefully
raise up the front edge while making
adjustments so the safety clip docking
bracket and long screw boss passes up
through the safety key mechanism.
Warning: Do not force the installation
of the bottom cover.
Hardware Required:
9 bolt M4 x 12
a) Secure the le and right shoulder
trim assemblies to the console rack
using 14 bolts M4 x 12.
Hardware Required:
14 bolts M4 x 12