True TC900 - Page 29

CHAPTER 2: ASSEMBLY GUIDE
Truetness.com / 800.426.6570 / 636.272.7100 29 of 171
TREADMILL ASSEMBLY STEPS:
Step 16 Rear Console Cover Assembly:
a) Secure the rear console cover assembly to
the console mast assembly using two bolts
M5 x 10.
CAUTION: Make sure cabling is NOT
pinched during installation.
Note: For specic console assembly
instructions, see the corresponding
section at the end of Chapter 2: Assembly
Instructions.
Hardware Required:
2 bolts M5 x 10