6 EN
Truma CP plus control panel
Symbols used
The appliance must only be installed and repaired by an
expert.
Symbol indicates possible hazards.
Note containing information and tips.
Observe the ESD regulations! Electrostatic charging
can destroy the electronics. Ensure that potential com-
pensation is present before touching the electronics.
Table of contents
Symbols used ..................................................................... 6
Intended use ....................................................................... 6
Technical data ..................................................................... 7
Installation instructions
Safety instructions ............................................................ 7
Scope of delivery ............................................................... 7
Description .......................................................................... 7
Dimensions ........................................................................... 8
Selecting a location ........................................................... 8
Connection .......................................................................... 9
Assembly ............................................................................. 9
Intended use
The electronic Truma CP plus control panel
1
is used to con-
trol and monitor a Combi CP plus ready heater and / or a
Trumaairconditioning system. The Truma CPplus
1
serves as
an interface for operating connected appliances via TrumaApp
and TrumaiNet Box.
The Truma CPplus
1
is intended for installation in caravans and
motor homes. Installation in boats is not permitted.
The Truma CP plus control panel can be retrofitted in
older Combi heaters. For this, consult Truma Service or
an authorised Service Partner.
1
And Truma CPplus CI-BUS for CI-BUS – not retrofittable.