14
34020-01385 · 00 · 07/2022
EN
Operation Truma CP plus
Mode Adjustable temperature range
Heater (HEATER) 5 – 30°C (1°C increments)
Air conditioning
(AC)
16 – 31°C (1°C increments)
Automatic climate
control (AUTO)
18 – 25°C (1°C increments)
Use the rotary push button to select in the menu
line�
Press the rotary push button to go to the setting
level�
Depending on the appliance that is connected,
choose between heater (HEATER), air conditioning
system (AC) or automatic climate control (AUTO),
using the rotary push button� (Not necessary if just
one appliance is connected�)
Press the rotary push button to confirm your
selection�
Select the desired temperature with the rotary push
button�
Press the rotary push button to confirm the value�
During heating / cooling, you can change the temper-
ature quickly on the stand-by screen, using the rotary
push button without opening the menu�
Special features in air conditioning (AC) and
automatic climate control (AUTO) modes
If the 230 V power supply (mains electricity) is interrupt-
ed, all functions associated with the air conditioning
system or automatic climate control modes are deacti-
vated and blanked out on the CP plus� With automatic
climate control, the Combi / Combi D is deactivated,
even in heating mode� When the 230 V power supply is
restored, the Combi does not start automatically�
Room temperature in heater mode (HEATER)
Symbol Displayed
text
Description
Heater is switched on�
To switch the heater off, select the temperature range
below 5°C (OFF)�
Room temperature in air conditioning mode(AC)
Symbol Displayed
text
Description
COOL Air conditioning system is
switched on
To Next Page
Loading...
Need help?
General
